You have no items in your shopping basket.
Close
Search
Filters
View as
Sort by
Display per page

Drum Storage Units - 8 - 20 Drums

  • Ground Clearance: 150mm
  • Fork Centres: 760mm
  • Heavy duty Drum Storage units of fully welded construction
  • Safe storage for 8, 10, 16 or 20 standard 210 litre drums, either palletised or loose loaded
  • Heavy duty frame is rated at 3 tonnes distributed load over a 3 metre bay
  • The 8 and 10 drum units are single tier and the 16 and 20 drum units are double tier
  • Swaged and re-inforced robust sheet steel walls on 3 sides
  • The sump units can be removed for steam cleaning and have removable galvanised grid floor panels
  • Fork guides ensure safe and secure movement
  • Finish: Stove enamel Blue
  • N.B. A Forklift will be needed to unload these units
  • Comply to Control of Pollution (Oil Storage) (England) Regulations 2001
 
From £4,859.40 incl VAT

Fully Enclosed Drum Stores

  • For use outside or where security is of importance. Doors have high & low level venting. 1 drum units are fitted with one door and 2 and 4 drum units have 2 doors, all with 3 point locking
  • Vertical drum stores are fitted with galvanised grid floors & horizontal drum units have an open topped sump
  • N.B. A Fork Lift will be needed to unload these units
From £2,624.04 incl VAT

Drum Store

  • For use outside or where security is of importance, doors have high & low venting - with 3 point locking
  • Drums are set back to allow space to dispense liquids
  • 6 drums stored
  • N.B. A Forklift will be needed to unload this unit
 
£8,342.46 incl VAT

Drum Storage Unit with Sump Base

  • Weatherproof for outside storage
  • RHS frame galvanised sheet cladding
  • Padlockable dual sliding doors for ease of access (padlock not included)
  • Benches & spill trays are available - see below for details
  • A forklift will be needed to unload these units
£10,392.96 incl VAT

Chemstore - Drum & IBC Secure Stores

  • 20 year structural guarantee
  • Base is manufactured from 3mm mild steel with RHS cross members & pressed ribs
  • Corner posts, shelf frames & main rails are rolled hollow section
  • The roof is pressed with suitable bracing & fully welded around the perimeter, while the back,
    side & door panels are pressed from 2mm mild steel sheet & corrugated where required
  • Fitted with crane lifting points (maximum 2000kg per lift point) & sliding doors
  • The floor area above the sump is covered with galvanised steel channel sections so that
    loose drums or pallets can be stored directly onto it, whilst the upper shelf is an open box section
    which is designed to support pallets. Grid mesh shelving is available - please call for details
  • Shot blasted before being painted (RAL 6029) for greater durability
  • Other colours are available - please call for details
  • EDRIB9624 - push back system above the sump, allowing the units to be pushed to the back of the units
Call for pricing

Drum Stands for 210 Litre Drums

  • Fully welded tubular steel construction.
  • DH443Z: with nylon top rollers to allow drainage from the side bung
  • DH442S & DH445S: mobile on 2 x 100mm fixed wheels & 2 x 75mm swivel castors
  • DH445S: as per DH442S but with nylon top rollers to allow drainage from the side bung.
From £232.86 incl VAT

Galvanised Sump Pallets

  • Comply to Oil Storage Regulations (England) 2001
  • Fully welded galvanised steel construction with removable galvanised grid for ease of cleaning
  • Complete with 150mm wide fork hoops which are used to move the unit and keep the sump off the ground
Call for pricing

Polyethylene Spill Pallets with Steel Covers

  • Comply to Oil Storage Regulations (England) 2001
  • Medium density polyethylene spill pallet with a 0.6mm galvanised steel powder coated cover with hinged doors
  • Hinged doors have retaining catches to hold them open & are lockable
Call for pricing
View as
Sort by
Display per page

Filter by:

Clear All